Check back often

Have you checked out all my blogs?


Dollhouse Minis: http://joannesminis.blogspot.com


18” Dolls: http://joannes18dolls.blogspot.com/


General Crafts: http://joannes-place.blogspot.com/


Cooking: http://joanne-kitchen.blogspot.com/





Also if for some reason I can't post I will try to give a head's up on the Facebook page so check there too.

Showing posts with label miniature accessories. Show all posts
Showing posts with label miniature accessories. Show all posts

Sunday, December 22, 2024

Dollhouse Miniature Christmas Gnomess

 


Watch the video here.


I have another free pattern for you to download so you make the project. You can find the file here. In the download there are 3 files: a PDF for hand-cutting of the pieces, a PNG to use with your electronic cutting machine and a text file with handy hints and tips (and the sizing information) to use the PNG.



As with most of these projects I cut all the pieces from medium weight white card-stock, the kind used to make cards and such. This is way more economical than having to purchase a bunch of colors and in my experience the paint colors are a lot more stable than the paper colors. I rarely get noticeable fading with the painted projects.


You are free to use the pattern as many times as you wish and even to sell the finished project. But, please don’t give away or sell my patterns. I spend a lot of time creating them and the only compensation I get is from people watching the videos and checking out the blog post. I really want to keep offering these for free so please if someone else wants to make one send them to the video and blog so they can get their own copy of the pattern.


 

Glue the pieces together as shown on the video using your favorite white glue. I like to use Tacky glue and I use a toothpick as a glue applicator.

 

 


Once the glue is completely dry I laid down a strip of masking tape (sticky side up) to hold all the pieces that needed to be painted. To make that easier I group the pieces by the color that I am painting them. I did the same thing with the 3 single layer cookie pieces but I used a piece of washi tape since it is slightly less sticky and won’t tear the single layer of card stock as easily.




 

I painted the back and hat with red. Then once dry I added a slightly lighter color of red to the hat to give it a bit of dimension.


 


 

 

The plate for the cookies with metallic green.


 

 


 

The braids with a golden yellow color.


 

 


 

 The hands and nose with a flesh like tone.


 

 

 


 

 

The had band with white.


 


 

The shoes with black.


 

 


And the cookies with a cream color. And once dry I added some “chocolate chips” with dots of a brown paint.

The cookies are simply a ¼” round and if you want a different shape cookie you could use any shape ¼” hole punch to make them.



Once the paint dries completely it is time to assemble the gnomess. This will be done in stages allowing the glue to dry at least a bit in between so everything stays in place as you add parts.



 

I like to start by gluing the hat to the hair and the nose as the first step. Then this can set up. Since she is holding the plate of cookies I also glued the cookies to the plate so they could also dry.


 

 

 


Next the hat portion can be glued to the body/backing piece. I wish I had glued my hat on lower to the body but I was feeling really rushed as I was working on the gluing since the building I live in is in the middle of having all the balconies removed and new ones put on. Just as my paint was dry they showed up to do the removal and it was very noisy for the rest of the day.


After the hat part add the shoes, the plate of cookies and the hands. Then allow the glue to dry completely.



 

Now we just need to add a thin even coat of a clear finish. I am using Satin Mod Podge on mine. I did coat the back off camera (including the edges all the way around) then when that dried I came back and coated the front on camera going over the edges a second time. I find doing 2 coats on the edges really helps to seal all those layers and makes the finished gnome look a lot nicer. Allow to dry.


 

 

 


As always I do want to sincerely thank all of you for watching my videos and reading my blog posts. It means so much to me that you are supporting me in this way. If I could ask you all to do just a bit more by subscribing to the channel and liking the videos and leaving comments. Those help more than you can imagine. Also if you could pass the links on to your friends I would appreciate it so much.


Sunday, September 8, 2024

Dollhouse Miniature Pumpkin Makeover

 


Watch the video here.




 

As I was walking through the Dollar Tree the other day I saw these pumpkins hanging on the wall. They caught my eye because of the size, they looked to be perfect for the dollhouse. The color however was way too bright to look like anything close to a real pumpkin. I knew I had to try to tone down that color and use some to decorate the dollhouse porch for the season though.


 

 

The first step was to remove the wire from the bottom of the pumpkins and replace it with a toothpick to use as a handle while painting. I have my little wooden blocks to put mine in but you could also use a foam block or a chunk of pool noodle to hold yours.



For the first coat of paint I used Anita’s in Terracotta, this is a very muted orange and will tone down the bright orange and work well as a base coat under the painting technique I am going to use today.
Don’t worry about this coat of paint being perfect, if a little of the bright orange peeks through that’s okay it will just add to the depth of color later.



 

I also base painted the stems with a very pale yellow paint. This will lighten them and allow the painting technique to work nicely to create the look of a dried stem on our pumpkins later.


Allow these paints to dry completely.



Now we are going to dirty up the pumpkins and accent the indentations on them. For this brush on a medium brown, I’m using some Woodsy Smoke from Anita’s. Then use a makeup sponge to blend the edges of the paint really well. I used a really small brush for this step to get the paint just in the crease part initially. When blending try to get rid of any sharp lines at the edges of the brown paint. Then allow this paint to dry completely.



Now we are going to give the pumpkin it’s color. For this I am using 3 colors of paint- the same Terracotta that we used earlier, Buttered Yam also from Anita’s, and some Vivid Orange from Folkart. You don’t need to use the exact same colors just some that are similar to these. Add a drop of each to a flat surface.

 

 


 

Then using a tiny brush add dots of the paints to the parts of the pumpkin that stick out from the indentations. I kept most of the Buttered Yam at the top of the area, the Terracotta at the bottom, and the
Vivid Orange at the middle. Then using a clean makeup sponge (the wide end) blend the colors to look like the photo. Allow to dry completely, since the paint is so thin this won’t take long.


 


 

Now we are going to tackle the stems and make them look like they are in various stages of drying out. Again we are using 3 colors of paint- the same brown we used earlier to “dirty up” the pumpkins, the same pale yellow we base coated the stems with, and Leaf Green from Ceramcoat. 

 

 


 

 

Again add a drop of each color to a flat surface and use a tiny brush to add tiny dots to the stem then using the skinny end of the makeup sponge blend the colors on the stem just like before. Try not to get these colors onto the pumpkin. When you have the look you like allow to dry completely.


 

 


 

Remove the toothpicks carefully and display your pumpkins around the dollhouse or in your fall mini scene.




 

As always I do want to sincerely thank all of you for watching my videos and reading my blog posts. It means so much to me that you are supporting me in this way. If I could ask you all to do just a bit more by subscribing to the channel and liking the videos and leaving comments. Those help more than you can imagine. Also if you could pass the links on to your friends I would appreciate it so much.


Wednesday, September 4, 2024

Dollhouse Miniature Neon Sign (non-working)

 

Watch the video here.



Today we are making a fake neon sign for the dollhouse or a miniature business. I was looking through a very old notebook I have that I wrote all kinds of projects in way back when I was first starting to do minis. This was at least 30 or so years ago. Back then I would go the library and check out any books or magazines they had on miniatures and take them home and read everything cover to cover. Took a lot of notes about projects I thought I might want to try to do someday when I had an idea of how to do them. This project was one of those.


When I read it the other day I was instantly intrigued this seemed too simple to work. But I am happy to report I think this could be a really fun thing to do to create some artwork for a more modern dollhouse room. I will say I would be very careful about where this is displayed since hot glue does have a tendency of melting again if it gets too hot. So keep this one out of direct sunlight. I think it will be fine in a normal room-box just don’t place it right in front of a window where the heat could melt it.


The first step in this project is to decide what your neon sign will look like. I went the easy route and just wrote the word “open” since my brain was not really in creative mode yet. I drew two parallel lines to give me the height of my letters and wrote my word all in pencil. I made my letters very blocky and simple. Then once I was happy with what it looked like I traced just the word with a black marker. This way I would be able to see it to trace over it later. I taped this to my work tile. This is my pattern.



Now I taped a small sheet of parchment paper (the stuff from the kitchen) over the top of the pattern. The tape won’t really hold it but it will help a bit. You need to work on a surface that is both nonstick and translucent so you can see your pattern.


 


Make sure you glue-gun is really heated up. I found with the one I have it needed to preheat for at least 10 or 15 minutes to get the glue to flow nicely on the lines. When I tried it sooner it was very lumpy and looked really bad. You want the glue to be dripping really well from the tip of the glue-gun. One the glue is hot it is just a matter of tracing the lines on the pattern. Keep in mind you might need to do multiple layers of glue to get a good looking line. Just take you time and go slowly. Once you have traced over all the lines on pattern make sure the glue between areas is touching. In my case I needed to make sure all my letters joined together. If there is space between them just add a small dot of glue to act as a “bridge” so that you will have one piece when you are done. Now let this cool and set up but leave you glue-gun plugged in so it stays hot.


Once the glue has hardened check to see if you have spots that are too thin or that you missed and add more glue as needed. You can do this as many times as you feel you need to until the sign looks the way you want it to look. Once you are happy let it cool all the way to room temp and you can unplug the hot glue-gun.


Now you can peel the sign off the parchment and take another look at it. If it needs to have more glue added this is the time. Go ahead and add glue to any spots you feel need it. Allow to cool again.


Once cooled use a small pair of scissors and trim the sign to remove any spots that don’t belong and also those hairy bits that hot glue always leaves.



Once you are completely happy it is time to add the color to the sign. I am using some alcohol markers made by Bic, you could use any brand of alcohol marker for this.


Turn the sign over and carefully fill in the back of the design with the marker. Skip any “bridge” areas you added to hold the sign together. I find it takes about 3 coats of ink to get a really good color. I also found letting the ind sit for a couple of minutes between coats allowed it to stay on better. I think (but I’m not sure) that what is happening is the ink is soaking into the glue.


Once the color is the way you want it you can either mount the sign on a board like I did. Or on the wall of your miniature scene.



I had planned to mount mine on black but I liked how the colors looked against the white better so that was what I went with.


For my board I cut a piece of foam-core slightly bigger than my sign, glued a piece of white paper on the front. Then I framed it with some black card-stock.



 

 

I ended up using tacky glue to attach the sign to the board.


 

Now for the almost disaster I had. I was originally going to use some super glue to attach the sign. And for most of the sign it was fine. But the spots where I put the dots of super glue on the area of the sign that was the green color instantly turned brown. I guess the super glue was reacting with the whatever that color ink was dyed with. The other 3 colors I used were fine just the green reacted. I was able to work very quickly and using a sewing pin I picked off the glue from the sign in those areas and then added more ink over the spots.



 

The sign I did on camera was the third time I traced the letters and I see a great improvement from the first one I did to the last one. With some more practice I think I could get some pretty intricate designs with this method and that could be a lot of fun.






As always I do want to sincerely thank all of you for watching my videos and reading my blog posts. It means so much to me that you are supporting me in this way. If I could ask you all to do just a bit more by subscribing to the channel and liking the videos and leaving comments. Those help more than you can imagine. Also if you could pass the links on to your friends I would appreciate it so much.

Wednesday, August 28, 2024

Dollhouse Miniature Paint Test How Many Coats???

 

Watch the video here.



I was in the mood to do another paint test and this is one that has been roaming through my brain for a couple of weeks now so here we go. I do want to preface this by saying I really wanted to do this test with the acrylic paint form Dollar Tree but they were out of the black so I decided to do the test with the Prang Tempura paint also from Dollar Tree. I have another idea that I want to do with the Dollar Tree acrylic paint which also will need the black so I hope they get it in stock soon.


So let’s start with the set up for the test.



I am using a sheet of 140lb weight watercolor paper. I used some acrylic (Anita’s brand) black paint to cover half the sheet.


I put out some of each the black and white paint that I am testing into containers that have lids to work from as the day goes on.


I picked two large brushes that were similar to use and they were wrapped in wet wipes between tests. This way I am not going back in with water in the brushes that could affect the opacity of the paint.



 

I then laid down as even of a coat as I could of the black on the white side of the paper and the white on the black side. This coat filled most the height of the sheet of paper. Then it was allowed to dry.


 

Off camera I added more single coats of paint allowing then to dry between. I would have filmed more of the coats but there were people in the parking lot outside my window with a stereo going loud enough that it would been picked up by my microphone. (YouTube would have not liked that at all)



I was surprised that the black covered a lot better than the white did in this test. Especially since the first coat of black was so transparent and blotchy. It really looked okay in person after the fourth coat was dry and the fifth coat looks really good. The white at this point was still lacking coverage big time.



 

 

With the white paint the fifth coat was almost okay… And for some applications I can see it being usable. The 6th coat was close to decent coverage, maybe one more would have been enough but I am not sure sure.



 


 

 

Off camera I also did test the white acrylic paint and the results were very similar to the white in the “official” test today.


 

 

 

So what did we learn. As expected with enough coats of the paint you can get decent coverage. The question is would it be worth it? That remains for you to answer.


I do wonder if these could be a good alternative as a base or primer coat. Since they are a lot cheaper than the good craft paints if they would seal the project and allow us to cut down coats of the more expensive paint it might be worth it for that. The question there in my mind is durability and that could be a future test on the channel.


I do have another test in mind where I think the lack of opacity would be a positive and as soon as I can get the black in the acrylic I will be doing that one.


In the meantime if you have paint tests you would like to see let me know I love doing these. They are probably the videos I have the most fun doing and that is just what I need some weeks.





As always I do want to sincerely thank all of you for watching my videos and reading my blog posts. It means so much to me that you are supporting me in this way. If I could ask you all to do just a bit more by subscribing to the channel and liking the videos and leaving comments. Those help more than you can imagine. Also if you could pass the links on to your friends I would appreciate it so much.


Sunday, August 25, 2024

Dollhouse Miniature Apple Gnomess


Watch the video here.

 


I have another free pattern for you to download so you make the project. You can find the file here. In the download there are 3 files: a PDF for hand-cutting of the pieces, a PNG to use with your electronic cutting machine and a text file with handy hints and tips (and the sizing information) to use the PNG.



 

As with most of these projects I cut all the pieces from medium weight white card-stock, the kind used to make cards and such. This is way more economical than having to purchase a bunch of colors and in my experience the paint colors are a lot more stable than the paper colors. I rarely get noticeable fading with the painted projects.


 

You are free to use the pattern as many times as you wish and even to sell the finished project. But, please don’t give away or sell my patterns. I spend a lot of time creating them and the only compensation I get is from people watching the videos and checking out the blog post. I really want to keep offering these for free so please if someone else wants to make one send them to the video and blog so they can get their own copy of the pattern.


Once the glue dries put the glued pieces onto a piece of tape that is taped to your work surface and paint the individual pieces.



 

 I painted the back piece with red.


 

 


 

The hair braids with a golden yellow.


 

 


 

The nose and hands with a flesh color.


 

 


 

 

The pie tin with some gray.


 

 


 

 

The pie with a cream color.


 


And the hat with a green.


Let the paints dry.

 

 

Then I came back and gave the pie tin a coat of silver.


And I added some darker red (I had to use a darker on off camera to get look I was after) to create some shadows in the ruffle area of the back.


Again allow the paint to dry.



 

Now we start the assembly of the gnome. I like to start by gluing the hair braids and nose to the hat.


At this time I also glued the pie tin to the bottom of the pie.


 

 

Allow the glue to set up enough that it will not allow the pieces to shift around. It doesn’t have to be completely dry to go to the next step.



 

 

Now we can add some dry brushed golden yellow paint to the pie. We want to make it look baked, just like when we use the chalks to color our polymer clay baked goods. When you are happy set the pie aside to dry.


 

 

 


 

 

Now it is time to add the head to the body. You can make her shorter or taller depending on where you place the head. It’s up to you. Do try to get the head on straight and centered side to side (that seems to be my biggest challenge when building these)


 

 


 

 

 

Next we glue the pie to the gnome and then glue the hands to the pie. Allow the glue to dry at least until you see no remaining cloudy glue areas.


 

 

 


 

 

Now just a quick coat of a clear finish. I’m using Satin Mod Podge today. Be sure to coat both the front and the back. I try to cover the edges with both coats to make sure they are sealed together really well to help hide the fact this is made from multiple layers of card-stock. Allow to dry.


 

 

 


 

 

 

And there she is with the some of our other apple themed items from past tutorials.


 

 

 

 

As always I do want to sincerely thank all of you for watching my videos and reading my blog posts. It means so much to me that you are supporting me in this way. If I could ask you all to do just a bit more by subscribing to the channel and liking the videos and leaving comments. Those help more than you can imagine. Also if you could pass the links on to your friends I would appreciate it so much.