Check back often

Have you checked out all my blogs?


Dollhouse Minis: http://joannesminis.blogspot.com


18” Dolls: http://joannes18dolls.blogspot.com/


General Crafts: http://joannes-place.blogspot.com/


Cooking: http://joanne-kitchen.blogspot.com/





Also if for some reason I can't post I will try to give a head's up on the Facebook page so check there too.

Showing posts with label polymer clay. Show all posts
Showing posts with label polymer clay. Show all posts

Sunday, December 29, 2024

Dollhouse Miniature Chinese Checkers

 

Watch the video here.


The day after Christmas I was talking to my daughter and she asked what I was doing that day. I told her I was trying to figure out what to make for today’s video tutorial. She said I really needed to do a project for New Years this year. I told that was a good idea but I still had no idea. Then she suggested a board game of some kind. She then reminded me that when she and her brothers were growing up New Year’s Eve was always a family game night. We would dig out all the board games to play and eat snacks to stay awake until to ring in the new year.


After I got off the phone I googled board games and settled on a Chinese Checkers set since it didn’t look as complicated as some of the other games and I also remember not only playing with my kids but I remember playing it as a child.


I did create a template for you to use to mark the holes on the board for the marbles. This template took me a while to figure out but was a really fun project. You can find the template here. You are free to use the template as many times as you wish and to make more Chinese Checker sets with it, you can even sell the games. Just please don’t sell or give away my template.


I did have to film this video on Saturday to have it up for you guys on Sunday so you got my first time through on all the steps. If I had had more time I would have gone back and re-filmed the cutting and marking of the board.



In the video I rolled the clay out, cut it with my round cutter then placed the template on top and used a pin to mark where the holes need to be. In hindsight I think it would have been better to put the template on the sheet of rolled out clay and marked the hole placement with the pin. Then used the cutter to cut out the round shape. I think it would have been much easier to get the board centered.


Since I had to wait until the last minute to film I didn’t have the time to start over by the time I realized this. My filming time is very limited this last week and probably for the next week or so. They are doing a major construction job on the building I live in and it is very noisy. For anyone interested they tore all the balconies off the building and are replacing them. Since I am on the first floor I don’t have a balcony that was affected but the noise of them working on the one just above me last week was really loud. I can’t film while they are working so I have to work when they aren’t. Hopefully they will move on to other parts of the building soon.


I decided to just use some white clay since it was handy but I saw some beautiful boards online made out of everything from acrylic to glass, to wood to marble and probably other materials I can’t think of off the top of my head. So pick something pretty for your board.


So to prep condition the clay of your choice and then roll it out, I used my set of double thick craft-sticks for the thickness. Lay the template over the clay and use a sewing pin to poke through each circle on the template. I know there are a lot of them but I was surprised at how quick this went once I turned off the camera and could just focus on what I was doing. (as suggested above I suggest actually cutting the circle out at this point instead of prior to this step like I did in the video)




Once all the holes are poked in the surface of the clay use a very small dotting tool to kind of open up those holes made with the sewing pin. Again this didn’t take nearly as long as I expected.


Once the holes are finished transfer you game board to a baking surface (paper plate) and bake at the recommended temperature for the clay you are using for 15 minutes and allow it to come to room temperature.



Once cooled I used a tiny drop of super glue in each hole (use a toothpick to apply the glue) and I used the raw spaghetti trick to transfer a tiny no hole bead to the holes. You will need 10 no hole beads of each color and you will need 6 colors. I set my game board up so it is ready to start playing. However, you could set yours up part way through the game to tell a story that is specific to your setting.


This was by far the most tedious part of the project (after actually making the template for you to use LOL) but I worked on it over about an hour. I would finish one color of beads. Then walk away and do something else for a couple of minutes. Then come back do another color set and again walk away for a few minutes. I find this helps me to get through this type of project much easier with fewer mistakes.



 

 

Allow the super glue to dry/set up then give the board a couple of coats of a matte or a satin clear sealer. I used Mat Mod Podge.


 

 

 


 

And here we have the board set up in a scene, it looks like the kids talked grandpa into a game of Chinese Checkers…..



 

 

As always I do want to sincerely thank all of you for watching my videos and reading my blog posts. It means so much to me that you are supporting me in this way. If I could ask you all to do just a bit more by subscribing to the channel and liking the videos and leaving comments. Those help more than you can imagine. Also if you could pass the links on to your friends I would appreciate it so much.

Wednesday, December 25, 2024

Polymer Clay Test: White Clay

 

Watch the video here.


Last week I showed you the translucent clay that I had added onto my recent Michael’s order. I got this block of white Craftsmart clay in the same order. I was in need of some white clay and I was curious when I saw this because the price was lower than the same size block of Original Sculpey. I think I paid around $13 for this 1 pound block of clay. If I like it that is a really good price.


What I am expecting before I open it is for it to be soft and similar to the Original Sculpey clay.


Upon opening I did find it to be a bit softer than the Sculpey but not by a long way. By the time both were completely conditioned they had a very similar texture. I did not like that the Craftsmart brand left white residue on my fingers though.


The other brand of white clay I have on hand is part of a block of Original
by Sculpey. It is much firmer than the Original Sculpey and more suited to doing things where I want to have fine details.


To set up the test I grabbed my clay roller, clay blade, some sets homemade spacers for rolling the clay, a small round cutter, my chalks with their brush, and a new paper plate. I marked the paper plate into 3 areas for the 3 brands of clay.


Once I was set up (and had the oven heating) I conditioned a ball of each of the 3 clays.


I proceeded to work with each clay. I rolled out the clay using my single layer guides and cut 2 circles. That way I could leave one white and add some chalk to the other one. I also used my double layer guides to roll out thicker slabs of clay and cut 1 circle of each clay from the double thick piece of clay.



I am looking at several things in this test. First off I am looking at the unbaked texture of the clay. How easy are they to condition? I am looking at how smoothly they each roll out, do I get excessive finger prints on any of them? Once baked, what color is the clay? Is it a nice bright white or is it an off-white? Did the clay remain the same size? I have been working with polymer clay for over 30 years and I have never seen one that shrinks but, as my dad always said there’s a first time for everything so I am looking at that. I added chalk to one of the circles of each brand to see if there was a lot of difference in how well the chalk stayed in place once baked.


I did check the package instructions for temperature and baking time. The Craftsmart has exactly the same directions/temperature as the Scupley products.


I baked the samples at 250°F, (the packages all called for 275°but my oven has a bad habit of going higher than I set it) for 15 minutes.


I then allowed the clay to come back to room temperature.



The first thing I noticed was how nice and white the Craftsmart clay came out. It looks great. All the clays baked up nice and smooth.


As for the chalk test there was conditioned the Craftsmart did wipe of slightly easier than the other brands. The Premo held the chalk the best of the three.


Here are some close up photos of all three clays so you can see for yourself how they came out.


So my thoughts overall, I am much happier with the clay than I really thought I would be. It came out very white, it is easy to work with. It is very soft fresh from the package, even softer than the Original Sculpey but once conditioned I think it seems to be nicer to work with, other than that bit of residue that it left on my fingers.


So if you are looking for a less expensive white clay I would say check this one out. It won’t work for everything and I doubt it will be suitable when I want to make a project that has fine details since you really need a firmer clay for detail work. But for those projects that don’t have the really fine details and if you want to give your hands a rest and just have some fun with the clay I like this stuff.




As always I do want to sincerely thank all of you for watching my videos and reading my blog posts. It means so much to me that you are supporting me in this way. If I could ask you all to do just a bit more by subscribing to the channel and liking the videos and leaving comments. Those help more than you can imagine. Also if you could pass the links on to your friends I would appreciate it so much.

Wednesday, December 18, 2024

Polymer Clay Baking Test- Translucent Clay Comparison

 

Watch the video here.



I decided to grab a block of translucent clay and when I saw that Michael's has Cernit brand available I decided to get it. I then went to my YouTube channel thinking I had done a baking test of translucent clays many years ago. I was really confused to not find a video since I remember doing the test. Then I checked the blog and discovered that when I had tested the translucent clays way back in 2012 I had made it a blog post only. So today we are testing the 3 brands of translucent clay I have on hand.


I am doing the test in a similar manner to how I did the old one just subbing in the clays I have on hand today. Some of the clays are different than I had then and some of the brands have made some major formula changes in the last decade plus. So I was excited to see how this was going to turn out and if I would get similar results to what I got way back then.


The three brands of translucent clay have on hand today are: Sculpey III, Fimo, and the Cernit that I just picked up.


I mixed all three of the translucent clays with both red and black. I chose those two colors specifically for the following reasons. Red because red has a habit of color shifting more than any other color of clay I work with. And black because if we are mixing a translucent with black we want it to still be black and not change to a gray.


I did several things off camera for the test. First I marked a paper plate for my baking surface that gave me areas for each brand of clay and a spot to put the control samples of the colored clays. That way I knew I would be able to keep all the samples in the correct places and not get them mixed up.


Next I found the thinnest craft-sticks I had on hand (a slim stick from Hobby Lobby) to use as a rolling gauge. Since I only had one I cut it in half that’s why I am using the short pieces in the video.


After rolling the clay I used a small round clay cutter to cut pieces that were all the same size of each clay. And since I was so short of the Sculpey clay I cut those circles in half and used just a half circle of each clay in each test. I cut 3 half circles of each of the translucent clays and 4 each of the red and black clays. I made sure to put the pieces of clay in the correct areas of my labels paper plate.


I then mixed the samples I wanted to bake- 1 that was equal parts black and translucent and one red and translucent. I left one piece of the translucent clay plain also. In the center of the paper plate I kept on piece of each of the red and black clays.



I rolled the mixed samples out with my clay roller and the same spacers. I then baked the all the clay at the proper temperature for 10 minutes and allowed the clay to come to room temperature.



Now let’s talk about each brand individually.



Sculpey III- this one is definitely the softest of the three and the easiest to work in with the colored clay. The big downside for me is the translucent clay on its own stays somewhat beige when baked. Although this wasn’t an issue in the test with the colors that I used I think if I had used white as a third color we would have seen a difference in the baked color. Also the translucent properties are really not great. Even with the thin sample I baked there was no way I could see the black lettering on the plate through the clay.



Fimo- this was the firmest of the translucent clays and because of that it was a bit of a challenge to get it combined with the colored clay. Once mixed in it acted very nice. This translucent clay is very white when raw and keeps that white hue when baked alone. I do find it works well with pretty much any color of clay I combine it with. I could see the lettering through the plain baked sample a bit.



Cernit- this clay does have a somewhat strange texture by itself. It is almost slimy and because if that it was a bit hard to combine with the colored clays. I do like the feel of the clay once I got used to it though. It did bake up the most translucent of all the clays tested today. I think for most projects when I can get this one I will stick with it. I like how it worked in.




As always I do want to sincerely thank all of you for watching my videos and reading my blog posts. It means so much to me that you are supporting me in this way. If I could ask you all to do just a bit more by subscribing to the channel and liking the videos and leaving comments. Those help more than you can imagine. Also if you could pass the links on to your friends I would appreciate it so much.


Sunday, December 10, 2023

Dollhouse Miniature Fireplace Grate

 

Watch the video here.



This week I decided we should start on the some of the accessories I have planned for the fireplace we made. This week we are making a grate to set the logs in the firebox onto.


I decided that clay would be the best medium for making our fireplace grate look the way I wanted it to look. But before we can get out the clay we need to create the mold or jig that we are going to use to form our clay to bake it.


I am making this grate to fit into the fireplace we made on the channel and for that I made the firebox very shallow to it would not take up too much room in the dollhouse. So I am making what is basically ½ a fireplace grate. In the real world the depth of the grate would be about twice what we are making and the bars that form the basket would curve up on both the front and the back. Ours today only curves up in the front and sits right against the back of the firebox.



For this mold I am using some craft sticks. For the leg part of our piece I used cut 4 pieces of one of the really big craft sticks from Walmart. The length isn’t really that important around an inch is what I did. Then glue the 4 pieces of the large craft stick together and clamp until the glue dries completely.


To form the mold for the top pieces I cut one of the regular size craft sticks from the dollar store in half and glued and clamped it until dry.


If you are going to make larger fire grate that has the full basket use a wider craft stick (like the tongue depressor size) and form those pieces just like the legs.


The glue on these pieces needs to be completely dry because they are going to go into the oven when we bake the clay on them and if they aren’t completely dry the glue could soften enough to make the mold come apart and distort the shape of our clay pieces.



Once the glue is dry sand the edges of the pieces. Don’t worry about the cut ends just the part that were the edges of the craft sticks. Smooth them out a bit. Then wrap with at least 2 layers of aluminum foil. The foil has two jobs. First it is going help smooth the edges so your clay hangs nicely. But more importantly if the clay tries to stick to the foil it is really easy to peel it off. If you skip the foil and the clay sticks to the wood it will be really hard if not impossible to remove it without breaking it.


We only need one color of polymer clay, black. For mine I used some Fimo soft. You can use whatever brand you prefer for this just keep in mind that the softer the clay when you work with it the more brittle the finished piece could be. That has been my experience anyway.



 

So condition your black clay to make it workable. Then roll out a sheet of clay using some craft sticks as a depth guide. Once rolled cut strips of clay about the same width as the thickness of a craft stick. This will create what looks like square metal bars to make the grate out of.


 


 

Now lay some of the clay strips over the bigger mold cutting the ends even with the bottom of the sides of the mold. You will need 2 for the grate but I highly recommend making at least 4 if not more. All the pieces we are working with are very fragile and I broke a couple of each size.


 


For the smaller pieces lay strips over the narrower mold and cut them even with the bottom of one side of the mold and then even with the top edge on the other end. They should form something that looks kind of like a capital letter L. Again make at least a few extra.


Leave the pieces on the molds and bake at the temperature recommended for your clay for 10 minutes. Allow to cool to room temperature.


Now time for assembly of our fireplace grate. Before we get to the how to do this step I am going to admit that the entire project almost went into the trash at this point. I had planned to use liquid clay but that was such a total fail that I knew I had to come up with a different plan. So I spent some time thinking and doing some research on what glues I could use.


To begin I wrapped some masking tape sticky side out around the mold I had used to form the legs for the grate. This is going to be a really important thing for a couple of reasons. First being it makes lining everything up so much easier. The other reason I’ll talk about in a bit.


On the surface of the tape I made some pencil lines. Front to back drew a line a ¼” from each end. Then I added 2 more lines that were ¼” apart. These 4 lines are where we will be lining up the small pieces that form the basket of the grate.


Then I drew a straight line lengthwise on the tape and a second on 3/8” away from it. These are the lines I am going to line the legs up with.


Because the sticky side of the tape will hold the legs in place so I can work with them this step will be so much easier that I first thought it would be.



Since I am using glue I had decided that super glue (CA glue) would be the best choice for the project. I have used super glue many times with polymer clay I know I have a tube of it somewhere. Somewhere being the operative word, I searched everywhere I could think of to find the tube I put away a couple of weeks ago when I cleaned off my work table and did some tidying up. I have no idea where the “easy to find again” place I put it is so I had to come up with another option. I am also out of my other two favorite glues to use oath cure polymer clay, at least one of which I don’t think is even made any more. So I did some research online and according to a couple of jewelry making sites e6000 is polymer clay safe. So that was what I ended up using. The sites I looked at did say the bond can be brittle but this won’t be handled very much and the spots can easily be re-glued if needed in the future.


Let the glue cure then we can move onto the next step.


Once the glue holding the grate together has cured enough that it will hold together. It will be time to remove it from the mold. This is a step that can be very frustrating. I actually broke the one grate I made on camera and had to make a second one. So learn from my mistake.


To remove the grate first slit the masking tape on the bottom side and slide it carefully off the mold. Do not lift the ends of the tape at all. Just slide it sideways to remove it. Then carefully peel the tape off the bottom of the fireplace grate. This is the other reason for the tape, if we had glued this on top of just the foil and it stuck we would have a lot more trouble removing it.


Once the grate is off the mold glue in some firewood into the grate so it looks like the doll family can light the fire on a cold night.



For my firewood I picked up a small branch on my walk last week. As soon as I got it home I placed it on a baking sheet on top of a sheet of aluminum foil and baked it at 250°F for about an hour. This should kill any bugs that might try to come into your home with the stick. It will also dry out any dampness remaining in the wood. I like to put it on foil just in case it leaks anything out, that protects my baking sheet.



I cut a couple of pieces of the stick about 1” and used the sane glue (e6000) to glue the wood to the grate and to each other.


Keep any remaining stick pieces because we use more of it in a future project.



As always I do want to sincerely thank all of you for watching my videos and reading my blog posts. It means so much to me that you are supporting me in this way. If I could ask you all to do just a bit more by subscribing to the channel and liking the videos and leaving comments. Those help more than you can imagine. Also if you could pass the links on to your friends I would appreciate it so much.

Sunday, October 1, 2023

Dollhouse Miniature Decorative Pumpkins

 

Watch the video here.




 

 


The very first step was to pick out the colors of polymer clay that I felt would be good for this project. I stuck mostly to what I would call fall colors. The muted oranges, yellow, muted green, brown, dark red, plum and brown. I also grabbed a bit of white and black. At this point I had no idea how many of the colors I would use I just wanted a range of colors that I could pull from.


The next thing that needs to be done is to condition the clays. This is the same thing we do anytime we work with polymer clay. If you are unfamiliar with working with polymer clay I have a Clay 101 playlist on the channel (which you can find here) that goes over a lot of the techniques of working with polymer clay.


The first pumpkin I show you how to make is a pretty generic shape, just the round typical pumpkin.



 

Start with a ball of clay about the size you want your finished pumpkin to be. This could be anywhere from ¼” to 1” or even larger.


 


Now use something like a ball tool (or the handle of a paint brush) to make a dent in the top of the pumpkin. This does a couple of things, it makes a definite place to begin the segment lines, gives us a place to later put the stem, and it helps to flatten the bottom so the pumpkin. will stay in place while we are working on it.



Now use a “pointy tool” to make the segment lines running from the dent to the bottom of the pumpkin. If you are making several pumpkins to be displayed together I think it looks better to vary the number of segments and how deep they are. That is one way to easily make each pumpkin look different.



Now take a tiny ball of the same clay and make a tiny ball then a teardrop from it for the stem. Place it in the dent in the top of the pumpkin and use a tool to help smooth the joint between the pumpkin and the stem. You can shape each stem a bit differently and add lines/texture to some.


 

Now carefully move the pumpkin to your baking surface.



 


 

The second pumpkin I show you how to make is a taller skinnier one. For this one start with a ball of clay again but after you make a ball roll it to make an oval shape.



 

 


 

Now use the dotting tool to add the dent on the top.


 

 

 

The “pointy tool” to add the segments.


 


 

And finally add the stem.


 

 


The third pumpkin I made on the video was a flatter version. For this I like to start with a smaller ball of clay since they do spread in diameter when you shape them.

Make a ball like before but this time use your fingertip to flatten the ball as much as you want for your pumpkin.



 

Now proceed with the same steps as before, add the dent.


 


 

Add the segment lines, I do like this shape to have deeper segment lines but that a personal choice.



 

Then add the stem.


 

 


The last pumpkins I made on camera was the marbled one. For the on-camera on I wanted to focus on the dark reds and the other warm colors. For the one I did for the pictures I used some of the greens along with the yellow and white. We have made marble on the channel several times before and there are many ways to get this effect. I just did a very simple process for the video to get the look I was after.


 Once you get the marble to look the way you want it to proceed exactly the same way as before. The only real difference in how I made this one was that I wanted it to be the star of the collection so I made it much bigger than the others.



 

Make a ball.


 

 


 

Add the dent in the top.


 

 


 

Add the segment lines.


 


 

And finally add the stem.


 


To bake the pumpkins use the temperature stated on your clay package. If you are using multiple brands of clay with different temperatures use the lowest temperature stated. I baked the smaller pumpkins for 20 minutes and the 2 larger ones for 45 minutes. That way I was sure everything was baked all the way through. Allow all the pumpkins to cool to room temperature before moving to the next step.



I

 really wanted to add some gold stems to a few of my pumpkins and to do that I just used some gold acrylic paint and carefully painted just the stem. You could of course paint other details on some of your pumpkins. You could use another color of paint, just be sure to stick with acrylic paint for the baked polymer clay. Allow the paint to dry completely.


 

 


All that is left to do is add a coat of clear finish to your pumpkins. You could do different finishes on different ones to give even more variety just be sure that you only use polymer clay safe products. I decided to just use the Satin Mod Podge this time since it has been a hectic week and I needed to finish up.



 

But here you can see the pumpkins displayed all together along with the plastic ones we re-did on Wednesday's video and a couple of other fall items we made last year on the channel.


 

 

As always I do want to sincerely thank all of you for watching my videos and reading my blog posts. It means so much to me that you are supporting me in this way. If I could ask you all to do just a bit more by subscribing to the channel and liking the videos and leaving comments. Those help more than you can imagine. Also if you could pass the links on to your friends I would appreciate it so much.